Increasing Brightness / More Light.

JDA · Post by **JDA** » Sat Mar 29, 2008 6:51 am

Hi

1
Room with a mesh emitter, RGB White.
Black Body, Gain 1.0, tempature 6500

2
Room with a mesh emitter, RGB White.
Black Body, Gain 1.0, tempature 6500

Brightness increaded in Paint Shop Pro X

Question.
How do I get it to be bright in image1 like in image 2
without using more mesh emitters and or Paint Shop Pro's adjust brightness?

jurasek · Post by **jurasek** » Sat Mar 29, 2008 7:44 am

"Indigo Manual.pdf" ?;)
Page 24 -> Tonemapping, and Violet is your best friend.

greetz,
jur

pixie · Post by **pixie** » Sat Mar 29, 2008 3:04 pm

Well Violet is more or less a Paintshop Pro Lite, with only a very specific subset of features related to image calibration.

Post by **OnoSendai** » Sat Mar 29, 2008 3:49 pm

It's pretty much a tonemapping problem, JDA.
If using Reinhard, you want more burn.
So lower the burn threshold value from 10. (the default)

JDA · Post by **JDA** » Sun Mar 30, 2008 2:08 am

Hi

Well here it is after about 5 hours.

I turned the Burned down and it helped.

I'm looking for more light to be evenly
(dispersed /distributed / scattered/ spread) through out the room.

How can that be done without using another application like Violet?

Kram1032 · Post by **Kram1032** » Sun Mar 30, 2008 10:52 am

...Using the settings, already in Indigo, instead of setting the afterwards in Violet. (And it'll look the same, so Violet actually is an advantage

)

Increasing Brightness / More Light.

Increasing Brightness / More Light.

Who is online